DynaColor QIG-510 Series Guia de Instalação descarregar pdf (Página 36)

Installation Guide

Items Needed:

• Dome Camera

• Data Cable (supplied)

• Ethernet Cable (network Dome Camera)

• Straight Tube and equipped items (optional accessory)

• Indoor Mount Kit (optional accessory)

• Waterproof Rubber (Indoor Mount Kit’s accessory )

• Screws and Screw Anchors for fixing the Straight Tube onto the ceiling

(not supplied)

Tools Needed:

• Tool for drilling

• Tool for screwing

Follow the steps to mount the Dome Camera with the Straight Tube.

1) Ensure that the ceiling can support the weight of the Dome Camera and

Straight Tube.

2) Make a cable entry hole on the ceiling.

3) Fix the Straight Tube to the ceiling with proper screws and screw anchors.

4) Attach the Waterproof Rubber to the Straight Tube.

5) Run the cable(s) through the Straight Tube with the Data Cable’s 22-pin

cable coming out of the outlet.

NOTE : After running the cable(s) through the Straight Tube,

please block the Tube’s outlet with the supplied sponge to avoid

insects entering the tube.

6) Thread the cable(s) through the Indoor Mount Kit and join the Indoor

Mount Kit to the Straight Tube with the supplied screws and washers.

Then adjust the Waterproof Rubber to the joint.

7) Connect the cable(s) to the Dome Camera.

8) Join the Dome Camera to the Indoor Mount Kit with the supplied screw

and washers.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 58 59

Sem comentários

DynaColor QIG-510 Series Guia de Instalação Página 36