DynaColor QIG-510 Series Guia de Instalação

 2011 Moxa Inc. All rights reserved. P/N: 1802003640020 VPort 364A Series Quick Installation Guide Moxa Industrial Video Encoder First E

- 10 - NOTE After accessing the VPort 364A’s web-based manager, administrators should access System configuration > System > Account to set up

- 11 - Mounting Dimensions (unit = mm)

- 12 - DIN-Rail Mounting The aluminum DIN-Rail attachment plate should already be attached to the back panel of the VPort 364A when you take it out o

- 13 - STEP 2: Mounting VPort 364A on the wall requires 4 screws. Use the VPort 364A, with wall mount plates attached, as a guide to mark the correct

- 14 - NOTE Do not run signal or communications wiring and power wiring in the same wire conduit. To avoid interference, wires with different signal

- 15 - ATTENTION Before connecting the VPort to the AC/DC power inputs, make sure the DC power source voltage is stable. Wiring the Relay Output T

- 16 - RS-232 Console Port Connection VPort 364A has one RS-232 (10-pin RJ45) console port, located on the top panel. Use either an RJ45-to-DB9 or RJ

- 17 - RJ45 (8-pin) to RJ45 (8-pin) Cross-Over Cable Wiring 100BaseFX Ethernet Port Connection The concept behind the SC port and cable is quite str

- 18 - LED Indicators The front panel of Moxa’s VPort 364A contains several LED indicators. The function of each LED is described in the table below.

- 19 - process will run, and the VPort will reboot. The STAT LED will light in green when the VPort has finished rebooting. Specifications Video Vide

- 2 - Overview The VPort 364A is a 4-channel industrial video encoder that supports the H.264 video compression algorithm, which provides the best vi

- 20 - Serial Port PTZ port 1 port, RS-232 or RS-422/485 terminal block connector, 115.2 Kbps max. baudrate Console port 1 RS-232 RJ45 port GPIO Digi

- 21 - PAN/TILT/ZOOM • PTZ camera is controlled through RS-232/422/485. • PTZ Control Functions: PAN, TILT, ZOOM, FOCUS, moving speed, preset positi

- 3 - • One auto-sensing 10/100BaseT(X) or 100BaseFX (SC connector) Ethernet port • 8 output video streams and 8 client connections • 50 multicast

- 4 - VPort 364A Panel Layout 1. RS-232 console port 2. Hardware reset button 3. 8-pin terminal block for DI 1 to DI 4 4. 5-pin terminal block f

- 5 - First-Time Installation and Configuration Before installing the VPort 364A, check to make sure that all the items in the package checklist are

- 6 - NOTE The PTZ control protocol is not standardized. To use a particular PTZ control protocol, the video server must support the driver for that

- 7 - 2. The Broadcast Search window will show a list of all switches and VPorts located on the network. The progress of the search will also be in

- 8 - NOTE Broadcast Search can only search for devices connected to the same LAN subnet as the VPort. If your devices are located on a different LAN

- 9 - Step 8: Accessing the homepage of the VPort 364A’s web-based manager After installing the ActiveX Control component, the homepage of the VPort