DynaColor DH701 Guia de Instalação descarregar pdf (Página 51)

Installation Guide

accessory)

• Corner Thin/Wide Box (optional accessory)

• Indoor Mount Kit (optional accessory)

• Waterproof Rubber (Indoor Mount Kit’s accessory)

• Screws and Screw Anchors for fixing the Corner Thin/Wide Box (not

supplied)

Tools Needed:

• Tool for drilling

• Tool for screwing

Follow the steps below to mount the Dome Camera with the Corner

Thin/Wide Box and Standard/ Compact Pendent Mount.

1) Make a cable entry hole on the wall to recess the cable(s).

2) Fix the Corner Thin/Wide Box on the corner of the wall with proper screws

and screw anchors. Then run the cable(s) through the hole on the Corner

Mounting Plate with the Data Cable’s 22-pin cable coming out.

3) Fasten the Standard/ Compact Pendent Mount onto the Corner Thin/Wide

Box with the supplied screws and washers. Then thread the cable(s)

through the Standard/ Compact Pendent Mount with the cable(s) coming

out of the Pendent Mount’s outlet.

NOTE: Please block the cable entry hole with the supplied sponge

to avoid insects entering the Pendent Mount. See the illustrations

in section 4.4.2 Compact

Pendent Mount > Step 4.

4) Attach the Waterproof Rubber to the Standard/ Compact Pendent Mount.

5) Thread the cable(s) through the Indoor Mount Kit and join the Indoor

Mount Kit to the Standard/ Compact Pendent Mount with the supplied

screws and washers. Then adjust the Waterproof Rubber to the joint.

6) Connect the cable(s) to the Dome Camera.

7) Join the Dome Camera to the Indoor Mount Kit with the supplied screw

and washers.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 64 65

Sem comentários

DynaColor DH701 Guia de Instalação Página 51